You have an airlock in the radiator. Remove the filler cap for the rad and have a jug of water ready. Then start your engine and wait until it reaches the normal temperature. It will take longer with the cap removed, so you can rev it a bit to help it along. When it reaches the normal temperature, keep reving the engine, and watch the water level for the rad. You will see air bubbles appear and then the water level will drop. Por some water in to top it up, and keep reving the engine until no more bubbles appear. Do this with the heater in the %26quot;Hot%26quot; position. Then try the heater and see if its okay. Job done.
I have a ford mondeo 96 1.8 the air started coming though cold changed thermostat Still cold can any one help?
turn up the heat
I have a ford mondeo 96 1.8 the air started coming though cold changed thermostat Still cold can any one help?
I assume you mean that the heater blows cold only: You could have an airlock in the heater pipes, a blocked heater matrix, or disconnected heater control cables.
Have you checked the cable of the flap that diverts the cold air through the matrix (that heats the air)?
Subscribe to:
Post Comments
(Atom)
No comments:
Post a Comment